MagicArt is a new innovative articulator without using dental plaster. -Save working plaster
-Useless dental plaster
-Protect a plaster model
-Good for enviranment
1. Trim a rough plaster cast as show in Figures.
① In case of MagicArt-1, trim equally the width of the upper and lower plaster cast as show in Fig.1
② Also trim equally the end part of upper and lower plaster cast as show in Fig.2
③ Use part No.310 and 311 rubbers to make plaster cast easily.
2. Fix upper & lower plaster cast with using clamping screws (Part No. 105, 206, 207),
and use part No. 306, 307, 308 and 309 rubbers in case of need.
The upper body of articulator MagicArt-1, can be rotated in case need.
3. Connect and fix the upper and lower and lower plaster cast on right position
with using dental wax.
4. Please hold the ball holder carefully and acrew on the ball lightly by part No. 102
and 202 bolts with using hand or screw driver.
And than tighten the ball across by part No. 301 bolts with using screw driver.
Do not contact the end of ball holder to the neck of the ball.
834-23, Daeja-dong, Deogyang-gu, Goyang-si, Gyeonggi-do,
KOREA (412-480) / TEL.+82-31-964-6801 / FAX.+82-31-964-6802
E-mail : alphadent@alphadent.co.kr
COPYRIGHT (C) 2008 BY ALPHADENT ALL RIGHT RESERVED
Figure
